Installing FreeBSD 5.4 onto a 512 Compact Flash card
Submitted by parkviewadmin on Mon, 2005-08-15 18:14.This should have been really easy, but for some reason my brain wanted to make this far too difficult!
The other side of the motor
Submitted by parkviewadmin on Mon, 2005-08-15 09:40.
note the mounting bolts
10 ohm power resistor in the Acer AT PSU
Submitted by parkviewadmin on Mon, 2005-08-15 08:26.
I had to add a 10 ohm power resistor into the PSU so the Test PSU would come on line with no load present
Create a logo and icon for the SWASC project
Will need a logo, icon, and a web page favicon created for the project.
SWASC mailing list now online
Submitted by parkviewadmin on Sun, 2005-08-14 18:31.There is now a SWASC mailing list available. Currently quite a low level mailing list. Email if you would like to join.
Subversion repository of SWASC files
Submitted by parkviewadmin on Sun, 2005-08-14 18:23.As of the 14th August 2005, there is approximetly 317MB of files available. Mainly PDF's of other peoples projects, devices like GPS's, Digital Compasses, PC's etc. This is being added to when new items are found. There is a mailing list email sent out showing the new changes as files are added, modified or deleted etc. The repository is only available on request to people with fixed IP addresses, due to firewall considerations, and the limited bandwidth available.
Initial Mark I parts
Submitted by parkviewadmin on Sun, 2005-08-14 10:55.
GPS, Motor controller, Servo motor, 70mm propellor and shaft.
VP-200 GPS, terminated cable
Submitted by parkviewadmin on Sun, 2005-08-14 10:54.
The 12v power cable could have been a bit longer. The serial cable will have to be shortened.
